Components

- Prevents chain derailment when shifting to inner ring - Adjustable hose-type clamp fits 1-1/8" to 1-3/8" seat tubes

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Need a replacement line for your Avid hydraulic disc brakes? You're covered with Avid's Hydraulic Line Kit. It's got 2000mm of hose for front or rear application, and all the fittings to work with your brakes.

The industry standard cable-actuated disc brake since its introduction is still popular due to smooth ball bearing operation and ease of installation and maintenance. - All calipers have 74mm mounting bolt spacing - For use with short cable-pull levers - Pad retraction and spring tension are adjustable - Includes steel-backed sintered pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Short Pull - Hub/Disc Compatibility: 6-Bolt - Rotor Included: No - Weight: 204 g

The Box Three Disc Brake Rotor is a Stainless Steel, 6 bolt rotor designed for BMX Race. Utilizing a small size and rounded outside edges for safety is the optimal size for any BMX Race bike. FEATURES: - ISO 6 bolt brake/hub interface - Rounded outside edges - Lightweight Cutouts - High quality stainless steel rotor - High quality locking steel T-25 rotor bolts included

- Axle washers for use with 19mm bottom brackets - 19.1x26x2.0mm - Interface: 19mm - Sold in a 10-pack

Grenade style Schrader Valve caps

- Economy level forged alloy seat post clamps for BMX and cruiser bikes with 1" / 25.4mm seat posts - Clamp Size: 25.4mm - Material: Alloy

- Plastic spoke covers in a variety of colors - 300mm cut to fit length - 36 pieces - enough for one wheel - Increases visibility and demands attention

- Teflon-coated stainless steel inner wire - Includes cable, housing, ferrules, and cable tips - Cable length: 2100mm - Housing length: 1800mm - Use: Front or Rear - Length: 2100mm - Diameter: 1.5mm - Style: BMX/MTB

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Lower - Length: Fits most - Diameter: 1.5mm

- Upper cables measured from brake lever to detangler top plate - Lower cables are measured from detangler to cable stop/London mod - Includes adjusters compatible with most detangler styles - Use: Upper - Length: 9.5-11" - Diameter: 1.5mm

- Designed for caliper and U-brakes - Forged alloy lever / 2-piece hinged aluminum bracket - 2 finger - 22.2mm (7/8") clamp - Return spring - 93g each

- Diamond and ribbed pattern BMX grips - Flangeless - Longer 166mm length

- Hinged 2 finger lever - Forged alloy construction - 2 piece hinged clamp - Compatible with caliper and U-brake applications - Fits 22.2mm (7/8") handlebars - 166g pair

- Melt forged aluminum construction - Coiled spring tension adjust

- Bottom bracket for one-piece crank - Sealed mechanism - 24 TPI - Spindle Type: One piece - Cup Material: Steel - Weight: 310-315g - Cup Type: Press Fit - Cup OD/Bearing OD: 51mm

- Threads onto 3/8" axles - Double-sided - Oversized - Alloy - Length: 3" / 74mm - Width: .94" / 24mm - Sold as a pair

- Chromoly construction - Classic BMX Lay-back design - Material: Cro-Mo

- Durable nylon+fiber body - Heat-treated chromoly spindle - Molded pins - Loose ball bearings - 375g/pair

- Designed for linear pull & mechanical disc brakes - Aluminum construction - 2.5 finger - 22.2mm (7/8-inch) clamp - Left/Right: Right - Reach adjust and return spring - 88g each

Forged alloy platform pedals with a hardened chromoly spindle. - Molded pins - Size: 9/16-inch

- Super hardened nylon construction - 40mm diameter, 100mm length - Special insert fits 3/8" or 14mm axles - 90g (pair)

- Steel - Threads onto 3/8" axle - Knurled & grooved - Diameter: 33mm - Sold in pairs

8 spline BMX bottom bracket Spindle with bolts. - Diameter: 19mm - Crank arm Interface: 8-spline - Length: 150mm - Bolts included

- CNC machined 6061-T6 alloy - Fits 1-piece and 3-piece BMX cranks - 23.8mm hole for 1-piece cranks with shims for 19/22mm 3-piece cranks included - Hard anodized coating - Unique, 1/8" quiet drive technology - Mount Compatibility: 1-piece/3-piece - Chain Compatibility: 1/2" x 1/8"

- Forged alloy brake levers with reach adjustment - Compatible with linear pull and mechanical disc brakes - Left/Right: Set - Fits 22.2mm (7/8") handlebars

- For 19mm crank spindles and Euro bottom bracket frames - Sealed quad bearing design with alloy cups - Shell: Euro - Interface: English - Spindle Type: 19mm

- Converts a threaded Euro style bottom bracket to accept MID style 19mm compatible cranks - Bearings included - Shell: Euro - Interface: English - Spindle Type: 19mm - Cup Material: Alloy

- Compatible with both American and Mid style BB shells - 6061-T6 full CNC alloy construction - Anodized surface finish - Weight: 255g - Cup Type: Press Fit - Cup OD/Bearing OD: 41mm or 51mm

- One-piece chromoly crankset - 24TPI - Length: 175mm - Weight: 997g

The Nylo-Form pedals feature a low-profile, durable composite construction. - CrMo axle - Sealed bearings - Molded pins - Spindle size: 9/16-inch

- Black Ops DW1.1 wheelsets for popular modern day BMX and wheelie bikes - Black Ops MX1100 hubs with sealed bearings and laced with DT spokes - 24mm inner rim width supports a variety of modern sizes - OLD: Front: 100mm, Rear: 110mm - Gears: Singlespeed freewheel - Type: Tube only - Size: 29-inch

- Compatible with all Shimano, SRAM, and Campagnolo systems - Smooth surface reduces friction and improves performance - Teflon cables are friction-free and rust-proof - Stainless steel cables are permanently rust-free - 2750mm length is compatible with tandems

Bontrager's latest TLR sealant seals faster, lasts longer, and provides better air retention so you have a better tubeless experience with easier setup. The ammonia-free formula won't corrode rims or degrade tire rubber, and it provides permanent repair for punctures up to 6.5mm. Product details - Improved flat protection seals punctures faster - Increased air retention holds air longer with 3x less air loss than the original - Compatible with all TLR tires for use on road, gravel, and mountain bikes - Ammonia-free mixture won't corrode alloy rims or degrade tires - Effective in temperatures ranging from -5 to 120 degrees F (-21 to 49 degrees C) - Cool new blue color - Use with Bontrager TLR wheels, sealant, and rim strips for a complete tubeless system designed and tested to work together - Can be used in tubes to help seal punctures

Rejuvenate the performance of your road brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with road brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap

Clean up your Bontrager Elite stem cockpit with Blendr Elite bases. Blendr works with this simple formula: Stem + Base + Mount. Add accessory. Key features: - Bases for use with Elite stem - Add any XXX accessory mount for an elegant integrated look

Rejuvenate the performance of your mountain or town brakes with this convenient and valuable cable. - Rejuvenate the performance of your brakes with this convenient and valuable cable - Extra-long 2750mm length ensures fitment for any application - Compatible with most non-hydraulic mountain bike and city brake systems - Stainless steel cable is rust-proof, comes pre-stretched, and includes cable end cap - Diameter: 1.5mm

Bontrager's Race Lite Grips are made from a dual compound for top comfort and control. The hard inner core keeps the grips from slipping on the handlebars and the soft outer layer provides a great grip and all-day comfort in any condition. Race Lite Grips are available in an RL-S model, a low-profile grip with an aggressive texture, and the RL-T, a thick, aggressive grip for riders who like extra cushioning or have big hands.

Improve the performance of your shifting with fresh cable and housing. - Entry-level cable and housing set is great for servicing heritage bikes on a budget - Galvanized cable is corrosion resistant and comes pre-stretched - Includes one 1900mm cable and 1750mm of outer housing

The industry standard comes in all sizes Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

The industry standard comes in all sizes. Premium-quality Bontrager Standard butyl rubber tubes feature a 0.9mm wall thickness for the perfect balance of weight savings and durability. Product details - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality - Best value

Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition.

Bontrager's SSR Grips are made from a dual compound: the hard inner core eliminates slippage on the bars, the soft outer layer provides great grip and all-day comfort in any condition. The 90mm width of these grips accommodate twist shifters.

- All cables are pre-stretched - Low-friction, slick surface cables for smooth braking action - Can be used for road and mountain bikes - Stainless steel kit is rust-proof

Key features: - Blendr works with this simple formula: Stem + Base + Mount. Add accessory. - Bases for use with the Madone KVF Aero Integrated Bar/Stem - Add any XXX accessory mount (sold seperately) for an elegant, integrated look

Traditional, natural cork tape with an adhesive backing that helps it stay put during and after installation. Reflective Bontrager bar end plugs included. • Natural cork tape • Adhesive backing for perfect bar placement • Finishing strips and reflective Bontrager bar end plugs included • Cork

The Fat Bike Tube is just that, a tube built specifically for fat bikes. Tailored sizes perfectly suit the line of Bontrager fat tire models. Product details - 0.9mm wall thickness - Equipped with removable valve cores - Purchase 50 tubes to receive a full case - 35mm Schrader valve

- Quiets chain slap and protects chainstays from nicks and scratches - Standard protector fits most chainstays - Universal kits come with circle protectors to eliminate frame damage due to cable rub

Key features: - Original equipment replacement saddle ears for use with Bontrager saddles with carbon rails - Compatible with Bontrager and Trek rotary head seatpost and seat mast systems - Consult with manufacturer on compatibility with other saddle brands

Protect yourself from flats with Bontrager Thorn-Resistant tubes. Asymmetric design uses thicker rubber on the tread side and thinner rubber elsewhere, which saves weight while maximizing puncture protection. Product details - 4.1mm thickness (tread side) - Asymmetric extrusion puts extra rubber along tire sidewall and tread zones - 100% inspected for guaranteed quality 27-inch tire size equivalents - 700c x 28 – 32 also fits 27 x 1-1/8 – 1-1/4 - 700c x 35 – 44 also fits 27 x 1-3/8 – 1-3/4

An inner tube for fat bikes, built with the Hodag and Jackalope in mind. Fat tires need fat tubes. The Fat Bike Tube is just that, a tube built specifically for fat bikes. Tailored sizes perfectly suit the line of Bontrager fat tire models. Product details - 0.9mm wall thickness - Equipped with removable valve cores - 100% inspected for guaranteed quality

Bontrager's Forged Bar Ends add handlebar positions for climbing and comfort. The rough blasted finish provides a great grip for premium control and the low-profile clamp bolt stays out of the way and keeps your bike looking great.

Bontrager's Gel Cork Handlebar Tape gives you a confident, comfortable grip on your handlebars. There's an inner gel strip that cuts down on vibrations and road chatter for serious long-ride comfort. The natural cork feels good with or without gloves too. It comes in a wonderful amount of colors so you can customize your ride and includes a set of Bontrager reflective bar end plugs and finishing strips.

This classic bar tape combines the traditional feel of natural cork with the vibration damping power of gel for a comfortable ride feel and a clean aesthetic that will never go out of style. It's easy to install and comes with Bontrager finishing strips and bar end plugs. - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing

Key features: - Gel tape with natural cork feel - Ideal stretch for quick and easy installation - Inner gel strip for extra comfort - Finishing strips and reflective Bontrager bar end plugs included - Non-adhesive backing

Bontrager's Satellite Plus Grips boast a dual-compound rubber for a great feel and a large, ergonomic contact area for support and comfort. They also feature an integrated clamp that locks them on the handlebars so that they can't slip or move.